![]() ![]() If you plug the soundbar into a different HDMI port, you won’t get the benefits of either ARC or eARC. The same applies with eARC, and they will be labelled as such on the TV and soundbar. It’s supported by more expensive TVs (£1500 and above), but not always included in the spec.Īn ARC connection on a soundbar must be connected to the TV’s ARC connection. You can read more about ARC here, and get your head around eARC over here.ĮARC allows for uncompressed audio to be sent to the speaker, and is the best way to experience object-based audio soundtracks such as Dolby Atmos or DTS:X. The former is supported by practically every TV on the market the latter not as much. It allows data to flow in both directions, so from the TV to the soundbar and vice versa. HDMI can transfer both picture and sound, and ARC has been around since 2009. There are various ways of doing this, but the best option is HDMI. Now you need to get the soundbar connected. So, you’ve found a good place – a potential sweet spot even. This will allow you to add one later on if you want to upgrade down the line. If you’ve purchased a soundbar without a subwoofer, check to see if there’s a subwoofer output connection around the back. Others may require a wired connection, but this is more the case for very cheap soundbars. Most soundbar/subwoofer combos will pair together wirelessly. For Atmos soundbars you’ll need to sit at a certain distance to get a sense of height in the sound, and this measurement can be found in the manual or online. If all else fails, consult the manufacturer’s manual on what they think is best. The results aren’t always welcome, from either an overpowering sound to a boomy effect. Conventional wisdom suggests if you want more bass, place the sub next to a wall or in an enclosed area. Once everything is set up and connected, play around with the position of the subwoofer by playing a bassy scene from a film you’re familiar with to find the best location/performance. the sofa), or you can have it near the soundbar instead. However, this doesn’t mean it can be placed anywhere in a room, but some subs can be close to your seating position (i.e. If you’ve bought a bar/subwoofer combo, the sub offers non-directional sound to the soundbar’s directional audio, therefore placement isn’t as restricted. Do not put the speaker on the floor either. ![]() Even with conventional soundbars the potential for echoes, reverberations and vibrations is too much. There needs to be clearance above the unit so it can bounce sound off the ceiling. While some suggest placing a soundbar in a cabinet, that’s a definite no-no, especially for Dolby Atmos soundbars. A TV with a central stand – as opposed to feet – offers enough clearance so the soundbar doesn’t cover up the TV’s IR signal. It should sit in front of the TV (or below for wall-mounting) and facing towards your seating position. Place it at ear level (sitting down) as a soundbar produces directional sound (i.e. If there is, it may end up obstructing sound if the speaker is capable of firing effects out to the side. Ideally it will be in the centre of whichever piece of furniture you opt for, and there won’t be anything on the sides. Make sure the surface is wide enough to accommodate, and ensure that the surface you place it on is flat – a TV rack, shelf or table will do. If not, wall-mounting solutions are available from the manufacturer’s site or third-party options. Soundbars can come with wall-brackets in the packaging (screws aren’t often supplied). You have a choice of placing the soundbar in front of the TV, or on the wall if the telly is wall-mounted. Related: Best Soundbar Where should you place your soundbar? We’ll go through all the details you need to consider, from placement to connection and the final things you need to consider to optimise performance, and get you started on the road to better TV sound. Your soundbar has arrived and it’s now sitting there, waiting to be plucked out of its packaging. ![]()
0 Comments
Leave a Reply. |